PowerCON Mains Input 3 Pin 20A Chassis NAC3MPA-1-WOT Neutrik

NAC3MPA-1-WOT
Power in, air-tight D chassis connector with flat tab terminals.
The NAC3MPA -1-WOT has no rear cover allowing extra access to the terminals useful when soldering large cables
A Locking 3 conductor equipment AC connector, contacts for line, neutral and pre-mating ground contact.
With a fast and easy locking system and high current capacity (20 A rated) the NAC3MPA -1-WOT is extremely robust and reliable. Meets all prevailing safety standards, UL recognized, VDE certified and SEV approved. Very good cable handling and protection.

Note: The PowerCON® is a connector without breaking capacity, i.e. the PowerCON® should not be connected or disconnected under load or live!


NAC3FCA and NAC3MPA-1 are used for ‘power in’ to a unit
NAC3FCB and NAC3MPB-1 are used for ‘power out’ of a unit
Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating. Branded with unique hologram - guarantees genuine and authentic Neutrik product